WEAK TURNING INSERTS SLOWING DOWN YOUR PRODUCTIVITY IN HEAT RESISTANT SUPER ALLOYS?

Unpredictable tool life and slow rough-machining speeds can hinder critical heat-resistant super alloy (HRSA) component productivity. Get your high-volume roughing operations in these materials back under control and machine at elevated speeds with the newly added geometries in SecomaxTM CW100 family of ceramic insert grades.

Discover all SECOMAX™ CW100 insert grades

YOUR BENEFITS:

Turn more parts per cutting edge with round geometry
Greater wear resistance and high strength made possible with whisker-reinforced, aluminum-oxide substrate
Better tool life via flank and notch wear resistance enabled by chamfered (T) or honed edges (E)

YOUR CHALLENGES:

Difficult to machine HRSA materials
Excessive tool wear and breakage
High tooling costs
High cost per edge

OUR SOLUTIONS:

Silicon carbide whiskertype ceramic grade with optimized micro geometries
Strong, round shape with multiple cutting edges

Related content

PRODUCT DETAILS CW100_20196008.tif

Seco News 2019.2 SN_2019.2_Cover_Picture_Segments.tif

Machining Navigator / Catalog Turning Cover_Turning_calatogue_2018.2.JPG

NEW MP MILLING GRADES MP1501 AND MP2501

DURATOMIC® TM1501, TM2501 AND TM3501 GRADES TM_Grades

NEW 335.19 AND 335.18 DISC MILL CUTTERS Disc_Mill_20196030.tif

JC898 AND JC899 JC_19.2

NEW T-STYLE SIALON CERAMIC INSERTS FROM SECO EXCEL IN UNSTABLE CONDITIONS SN_2019.2_Cover_Picture_Segments.tif

Machining Navigator / Catalog Holemaking

SNS19.2_Cover_Summary

Machining Navigator / Product Catalog Milling Milling_Catalog_Cover_19.2.JPG

Machining Navigator / Catalog Solid End Mills Cover_Solidendmills_calatogue_2018.2.JPG

Machining Navigator / Catalog Tooling Systems Cover_ToolingSystems_calatogue_2018.2.JPG

Machining Navigator / Catalog Threading Cover_Threading_calatogue_2018.2.JPG

CS300 Ceramic Button Cutter Introduction SN_2019.2_Cover_Picture_Segments.tif

CS300 Ceramic Milling Application SN_2019.2_Cover_Picture_Segments.tif

R220.88 WITH SNMU INSERTS SNMU Inserts Campaign

TTP2050 HQ_IMG_TTP2050_20186131.tif

JM500 MICRO END MILLS B_08243.tif

JETI CONVERSION GROOVING AND PARTING-OFF

DOUBLE QUATTROMILL™ 14 HQ_IMG_Group_Photo_TTM_2019.tif

JM100 MINI END MILLS JM100

LP09 INSERTS HQ_IMG_High Feed 2 LP09.tif

DOUBLE OCTOMILL™ HQ_Double_Octomill_Group_Photo_TTM_2019 .tif

RCMX RANGE B_08238.tif

UNJ AND MJ THREADING INSERTS

POWER MILLING CHUCKS PMC_2-1.tif

JS750 END MILLS B_08155.tif

PCBN INSERTS B_08120.tif

STEADYLINE® & ø25MM (1”) SERIES HQ_IMG_Steadyline25_GL_Heads_Turning_20186133.tif

STEADYLINE® TURNING BAR ADDITIONS Steadyline_small.tif

JETSTREAM TOOLING® 20185347_cmyk.tif

DOUBLE QUATTROMILL™ 22 B_08104.tif