Learn how the new Double Quatromill 14 face mill and its double-sided inserts reduce cutting forces and increase depth of cut in this product introduction video.Maximize machine output and gain lower cost per cutting edge thanks to the eight double-sided, multi-edge inserts of the Double Quattromill 14 face milling cutter. The specially developed and extremely free-cutting insert geometries actually lower cutting forces and require less machine power while also ensuring workpiece stability.Significantly increase depth of cut for all roughing, semi-finishing and finishing operations with the two lead angle versions of the Double Quattromill 14 cutter. Take depths-ofcut up to 6mm with the cutter’s 48-degree lead angle version and as deep as 8mm with its 71-degree version when face milling materials that include stainless steels, titanium and other sticky materials as well as steels, cast irons and superalloys.
Double Quattromill 14 Face Mill Introduction
2019.1 New Product Launch Introduction
Video: Double Quattromill 14 Product Introduction
Jabro-Mini JM100 for Mold & Die Introduction
Octomill 06: Explanation and comparison of the system design
Octomill 06: Insert Handling
Video: Face Milling Performance and Economy with Double Quattromill 14
DOUBLE QUATTROMILL™ 14
Video: DOUBLE QUATTROMILL 14 - Performance and economy
Video: Stabilizer ST540 5-Flute Application Demonstration
Video: High Performance Optimized Roughing with Stabilizer 2.0
Video: 6 Essential Tips for High Performance Roughing with the Stabilizer 2.0
Video: Niagara Cutter Stabilizer 2.0 Product Introduction
Tackle Aluminum Milling with Ease Using the Niagara Cutter A Series
Niagara Cutter A245/A345 End Mills in Aluminum Application Video
.56 - SN.X1407Z
.54 – SN.X1407A
Square T4-12 Product Introduction
Square T4-12 Demonstrations - Standard & Helical
High Feed 2 LP09 Product Introduction
