Keep deep-hole operations from scrapping your parts
Eliminate scrapping large, expensive workpieces during final deep-hole operations with two new threading heads and grooving heads each for Seco’s Steadyline® turning and boring bars; for operations inside hole diameters as small as 30mm, the new heads with Seco’s high-repeatability GL-connection and Jetstream Tooling® high-pressure coolant capability mount to the recently released ø25mm (1”) Steadyline® bar diameter.Stability vibration damping solutions for deep turning operations up to 10xd with new GL-head additions to Seco’s Steadyline® ø25mm (1”) series.
Eliminate scrapping large, expensive workpieces during final deep-hole operations with two new threading heads and grooving heads each for Seco’s Steadyline® turning and boring bars; for operations inside hole diameters as small as 30mm, the new heads with Seco’s high-repeatability GL-connection and Jetstream Tooling® high-pressure coolant capability mount to the recently released ø25mm (1”) Steadyline® bar diameter.
The new threading and grooving heads provide application diversity for ø25mm (1”) Steadyline® bar along with its reach/overhang capabilities, providing highly effective anti-vibration technology for threading or grooving at depth up to 10xD.
RANGE OVERVIEW
Tool Holders (2018.2 launch)
- Steadyline® bar ø25mm (1.00") 6xD, 8xD and 10xD reaches with Seco-Capto™, HSK-T/A and cylindrical shank machine-side interfaces. Carbide reinforced bars
- Steadyline® bar ø100mm (4.00") 10xD; cylindrical shank only
- Exchangeable Heads
- NEW! Threading heads: GL25-PNR/L-17025-16AHDJET
- NEW! Grooving heads: GL25-CGIR/L-19025-1902JET
- GL25 turning heads (2018.2)
- GL rough boring heads (2018.2) ø60mm, ø80mm (2.50", 3.00") Steadyline® bars for boring range of ø66mm to ø115mm (2.60" to 4.53")
- 20 different GL25 heads incl. general turning, recessing & back boring heads
YOUR BENEFITS
Improved control on deep turning operations, less heat and longer tool life with Seco Jetstream Tooling® high-pressure coolant
Excellent process stability from Steadyline® vibration control technology
YOUR CHALLENGES:
- Achieving centered accuracy and probing repeatability within 5μm
- Tool changes are long and laborious
- Lack of operational versatility
- Too much vibration during operations
- High rate of scrap
- Inability to machine deep holes
- Poor performance due to tool deflection
- Poor surface finishes
- Heat and chips accelerate tool wear
| SECO´S SOLUTION:
- GL-connection for positional accuracy and easy clamping for different applications
- Steadyline® turning and boring bars, carbide reinforced bar for 10xD cylindrical shanks
- Jetstream Tooling® technology for grooving and threading operations
|