Helical Profile Milling with Turbo Mill
Your Challenge:Chatter-free profiling and reliable performance.Aerospace › Flap Tracks › Helical Profile Milling with Turbo Mill
Your Challenge:
Chatter-free profiling and reliable performance.
Our Solution:
Flap Tracks require many pro-filing applications where cutter radial engagement (ap/D ratio) is relatively low, below 15% ae/D. However large axial (ap) engagement is often desired. Seco can offer a range of helical Turbo milling tools specifically designed for these types of applications, with optimum geometries and maximum number of flutes for light cutting, reduced forces and less chatter. These helical tools will offer reliability, flexibility and performance.
View the product range
Case Study:
| Material: | Ti6AI-4V |
| Coolant: | Flood Coolant |
| Operation: | Helical Profile Milling |
| Criterion: | Tool Life / CM3/min |
| Fixturing: | Bespoke |
| Tool: | R217.69-02.00.OX-076-12.5A |
| Insert 1: | |
| Cutting data: | | vc | fz | ap | ae |
| | Metric | 30 m/min | 0.08 mm/tooth | 76 mm | 15 mm |
| | Inch | 98 sf/min | 0.0031" ipt | 3.000" | 0.600" |
| Results: | 2" diameter K=5 flutes 3.09 ipm/78 mm/min |