Helical Shoulder Milling with Turbo Mill
Your Challenge:Reliability and performance.Aerospace › Axle Beams & Main Cylinders › Helical Shoulder Milling with Turbo Mill
Your Challenge:
Reliability and performance.
Our Solution:
Seco’s helical cutters open the door to new levels of productivity. The free cutting performance of Turbo with our strong, thick inserts and hardened steel cutter bodies can more than handle the demands of landing gear component applications. These tools are becoming industry’s first choice for helical solutions in the new high strength titaniums where reliability, flexibility and performance tooling is required.
View the product range
Case Study:
| Material: | Ti5553 |
| Coolant: | Through coolant 50 bar |
| Operation: | Helical Profile Milling |
| Criterion: | Flank Wear |
| Fixturing: | Bespoke |
| Tool: | R220.69-00080-062-18.5A |
| Insert 1: | XOMX180616R-M10 T350M |
| Cutting data: | | vc | fz | ap |
| | Metric | 30 m/min | 0.1 mm/tooth | 25 mm |
| | Inch | 98 sf/min | 0.0039" ipt | 0.984" |
| Results: | 2.4 ipm / 56.5 mm/min feed rate, 100 mins tool life |