Reduce Setup And Cutting-Tool Vibration In Multi-Task Machining
Moving at higher speeds and feeds? Looking to optimize 45° B-axis applications on multi-tasking machines? Keep up with Seco-Capto MTM JETI Toolholders for General ISO turning.Discover the product range
Enhance chip control. Increase multi-task machining results
Multi-process machining saves time. It also improves parts with multiple operations on a single machine tool.
With Seco-Capto MTM JETI Toolholders for general ISO turning, you can optimize results with 45° B-axis turning on multi-tasking machines.
These toolholders deliver high-pressure coolant right to the cut. Meaning enhanced chip control and higher part quality.
A unique 3D-printed single-screw coolant clamp makes quick work of setup and insert indexing.
Challenge:
Increase chip control with 45° B-axis turning on multi-tasking machines.
Solution:
Seco-Capto MTM JETI Toolholders for general ISO turning use a 3D-printed coolant clamp. This delivers Jetstream® high-pressure cutting fluid to the cutting edge on multi-tasking machines.
Challenge:
Speed up setup time and insert indexing with 45° B-axis turning on multi-tasking machines.
Solution:
A single-screw coolant clamp on Seco-Capto MTM JETI Toolholders for general ISO turning means fast, easy setup and insert indexing on multi-tasking machines.
Multi-task machining needs multi-purpose tooling
Multi-tasking machines use dual spindles for greater productivity. With Seco-Capto MTM JETI Toolholders for general ISO turning, there’s no such thing as right- or left-handed tooling.
Use one set of tooling for 45° B-axis turning applications on both spindles. But that’s not all. Eliminate cutting-tool vibration and chatter for higher quality parts and surface finishes.
Challenge:
Fewer tools, optimized production with 45° B-axis turning on multi-tasking machines.
Solution:
With Seco-Capto MTM JETI Toolholders for general ISO turning on multi-tasking machines, there’s no such thing as right- and left-handed tooling. Instead, use the same machining tools on more than one spindle.
Challenge:
Extend tool life. Improve surface finishes. And raise production output with 45° B-axis turning on multi-tasking machines.
Solution:
No more cutting tool vibration or chatter with Seco-Capto MTM JETI Toolholders for general ISO turning on multi-tasking machines. Take machining results to the next level, even with materials that require high-pressure cutting fluid.
Discover the product range
Contact Us
