Maximize milling versatility with exchangeable end mills
Discover Seco X-Head: the modular end mill system for flexible, cost-effective machining. Maximum versatility.Discover the product range
The exchangeable Seco X‑Head system uses replaceable milling heads that can be quickly exchanged without removing the tool shank from the machine. These exchangeable head mills allow operators to switch between different milling geometries while reducing tooling inventory and setup time.
As a fully modular milling system, Seco X‑Head enables true interchangeable milling across multiple operations. Milling heads can be matched with different shank lengths, giving manufacturers flexibility for standard, long‑reach, and complex milling applications.
One tool, a multitude of milling options
Why stock more milling cutters than you need? When you want to transition from high feed to square shoulder to other milling operations, the Seco® X-Head system allows you to quickly and easily change among various solid carbide profiles and types. Optimize all your milling operations while you reduce your manufacturing costs and tooling inventory. With secure and reliable connections, the milling heads mount to a variety of available shank lengths for even greater versatility.
Your challenge:
Various milling operations and part features require different cutters, adding to tooling costs and inventories and machine idle time.
The Seco solution:
One Seco® X-Head exchangeable end mill system shank accommodates a range of different milling cutter types and geometries, easily and cost-effectively adapting to changing part machining needs.
Keep holders in the machine for faster tool changes
Time is of the essence when it comes to tool changes, especially in mass-production environments. To ensure changes are fast and easy, the Seco® X-Head system allows you exchange different milling cutter profiles and types with the simple turn of a wrench – and leave the system’s shank in the machine. Eliminate the need to reset tool lengths thanks to a secure and reliable connection that provides head exchange accuracies within 50 microns.
Your challenge:
Machines sit idle, costing valuable production time, as operators remeasure and reset tool heights after tool changes.
The Seco solution:
Seco® X-Head system shanks remain in the machine, so shops quickly exchange various diameters and types of end mill with the simple turn of a wrench. Eliminate the time-consuming task of
removing, remeasuring and resetting tools.
![]()
Stop coming up short in your milling operations
Deep cavities and other part features often require various types of expensive long-reach tooling. Get the tooling reach you need while you save time and money with the Seco® X-Head exchangeable end mill system that includes various shank lengths to meet your needs.
Your challenge:
Hard-to-access part features require an inventory of different long-reach cutters, increasing tooling costs and tool changes.
The Seco solution:
Use the Seco® X-Head system’s broad range of quick-change end mills with various long-reach shanks that allow you to access deep part features.
Sustainable machining by design
The Seco® X‑Head exchangeable end mill system is engineered to significantly reduce material consumption and support more sustainable machining practices. By providing separate cutting heads from the shank, only the worn cutting part needs to be replaced, while the shank remains in use. This approach enables multiple sustainability benefits throughout the tool lifecycle.
Your challenge:
Controlling your tooling costs while meeting your sustainability goals. Limited availability of raw material combined with the design of traditional solid end mills lead to high material consumption, unnecessary waste, and higher cost per component. This makes it difficult to balance economic efficiency with responsible resource use.
Our solution:
All Seco® X-Head cutting heads can be recycled, contributing to responsible carbide resource management. In addition, the heads can be reground, extending tool life and reducing the need for new carbide production. Compared with conventional solid end mills, the modular exchangeable head milling solution uses substantially less carbide material.
As an example, when comparing a standard 16mm diameter, 4-flute, solid end mill with an equivalent interchangeable head solution (mounted on a reusable shank), the carbide weight is reduced by 73%. This dramatic reduction in carbide usage directly lowers raw material demand, energy consumption, and CO₂ emissions associated with tool manufacturing without compromising machining performance.
Discover the product range
Contact Us
