BOOST STABILITY WITH END MILLS BUILT FOR RELIABLE RESULTSNewly redesigned Seco JSE510 Solid End Mills help secure production – with the lowest costs per meter – across common applications and materials.
Discover the product range
A budget-friendly solution that can handle any milling application in steel, stainless steel, cast iron, titanium and some aluminum with ease, the new Seco JSE510 family of solid end mills from Seco are highly versatile tools with the ideal balance between performance, tool life and value – ideal for a competitive industry where every second of tool life and ounce of machining capacity counts. Thanks to newly redesigned geometries and optimized grades, your shop can easily reduce production costs, improve process security and gain easy access to well-optimized milling performance.
Your challenge: High production costs caused by greater material and application diversity are impacting your profitability.
The Seco solution: Achieve the lowest cost per meter in steels, stainless steels, cast iron, titanium and some aluminums with a single, well-optimized family of solid end mills.
At the pace of modern production, manufacturers can’t afford unreliable process stability or poor tool life. The JSE510 family offers the productivity and security shops need thanks to redesigned geometries built for effective milling performance. High-cobalt carbide and a polished SIRA coating have been combined with an irregular tooth pitch and progressive helix to dampen vibrations and ensure high stability and long tool life, even in less rigid machines.
Your challenge: Insufficient machine or process stability causes poor tool life and inconsistent workpiece quality.
The Seco solution: Increase milling security and tool life with Seco JSE510 solid end mills’ irregular tooth pitch, progressive helix and optimized flute configurations.
A greater variety of low-volume jobs has become normal in most industries, and that means shops have had to struggle to keep up with the tooling requirements for a wider range of applications and materials. Instead, choose one simple solution – the Seco JSE510 family includes four geometries and two lengths that can handle virtually any milling application.
- JSE512: Two wide flutes for the big chips produced in axial drilling, keyway or slotting applications.
- JSE513: Three flutes for universal milling performance, in drilling, helical interpolation, ramping, full slotting and side milling.
- JSE514: Four flutes for optimized side milling and 2D finishing operations.
- JSB512: Ball-nose end mill geometry ideal for finishing 2.5D and 3D parts and other ball-nose applications.
Your challenge: It requires a large tool inventory to reliably mill a wider range of jobs and materials.
The Seco solution: The JSE510 family’s four geometries and two lengths are well-optimized for reliable performance across a comprehensive range of applications.
The newly redesigned JSE510 family does more than give your shop a versatile set of milling tools – these end mills come with applications expertise and customer support from Seco Tools. We leverage more than 80 years of experience to provide truly comprehensive services, all of which are aimed at making your manufacturing operations more productive and your business more successful.
Your challenge: Greater production complexity and high demands of skilled operators makes it tough to handle the pace of modern manufacturing.
The Seco solution: Seco JSE510 solid end mills are developed to be easy to implement and use for any level of operation
Your challenge: It takes too much time for operators to identify products.
The Seco solution: The Data Matrix codes are laser-etched QR-style codes that give each Seco product its own identity. All of the information about the tool, including batch and ID number, is available in less than a second by simply scanning the code using the Seco Assistant app.
Discover the product range
SECO JSE510 SOLID END MILL SERIES
BOOST STABILITY AND TOOL LIFE WITH OPTIMIZED SOLID END MILLS
JSE512/513/514 - GENERAL PURPOSE - SQUARE - UNIVERSAL - 2-4 FLUTES
Solid Carbide End Mills
Machining Navigator / Catalog Solid End Mills
Product Program Seco JSE510 - New Solid End Mill series
SECO TOOL IDENTIFICATION
JETI CONVERSION GROOVING & PARTING-OFF CAPTO
HIGH FEED SQUARE CUT SIZE 14 INSERT
ISO K THREADING TAPS
JH724/JH726 - High Speed - Taper Shape Medical - CoCr/Titanium - 4-6 Flutes
Micro Machining Solid Carbide End Mills
SMB713/714/716 - Miniature - Ballnose - ISO-S - 2 flute
J28 General Purpose - Square - Plastic - 1 Flute
SMB413/414/616 - Miniature - Ballnose - Plastic - 2 flute
SMB614/616 - Miniature - Ballnose - Graphite - 2 flute
SME714/716 - Miniature - Square - ISO-S - 2-3 flutes
SHF712 - High Feed - ISO S - 2 Flute
Free e-guide to Dynamic Milling
ADVANCED ROUGHING STRATEGIES - FASTER THROUGH OPTIMIZED TOOLPATHS
JC898 AND JC899
Video: HFM JHF980; Maximized high feed machining
Seco standards for Solid Carbide tools
NEW GRADE OF SECO END MILLS BOOSTS TOOL LIFE FOR DIFFICULT MATERIALS
SECO JM500 DELIVERS VISIBLE IMPROVEMENTS FOR MICROMACHINING
JMB112 - Miniature - Ballnose - Hard Milling - 2 Flutes
JME142 - Miniature - Square - Hard Miling - 2 Flutes
JME144 - Miniature - Square - Hard Milling - 4 Flutes
JS754/755 - High Performance - Square - ISO-M and ISO-S - 4-5 Flutes
NEW SECO SOLID-CARBIDE CUTTING TOOLS BOOST KNEE IMPLANT MACHINING SPEEDS
JHP751 - HIGH PERFORMANCE - SQUARE - ISO-M AND ISO-S - 2-4 FLUTES
JC898 - Composite - High Feed - 4 Flute
JC899 - Composite - Sharp - 4 Flute
AN335R - High Performance - Square - Aluminum - 3 Flutes
JS720/730 High Performance - Square and Ball - Titanium - 6-9 Flutes
DIARTR - Square - Composite - Left Hand Helix Router
J36 - General Purpose - Universal - 3 Flutes
J93/J99 General Purpose - Square - Plastic - 2 Flutes
J29 General Purpose - Engraving - Universal - 1 Flute
V31 General Purpose - Concave - Universal - 4 Flutes
HKM-HK General Purpose - Conical - Universal - 2-4 Flutes
JS412/413 General Purpose -Square - Aluminum - 2-3 Flutes
JS506/509 General Purpose - 30°-45° Chamfer - Universal - 3-4 Flutes
JS512/513/514 General Purpose - Square - Universal - 2-4 Flutes
JH734/736 - High Speed – Drop Shape – ISO-M and ISO-S – 4-6 Flutes
Video: Solid² JS564 & JS565
Video: Seco Solid² JS564 and JS565 - Tools for roughing up your competition
JH744/746 - High Speed – Taper Shape - ISO-M and ISO-S – 4-6 Flutes
JS720_C Advanced Roughing - Square - Titanium - 6-9 Flutes
JH710 High Speed - CoCr and Titanium - Square - 5 Flutes
JHP760/770/780 High Performance - Square - ISO-M and ISO-S - 4-5 Flutes
JHB970 HIGH SPEED - BALLNOSE - UNIVERSAL - 2 FLUTES
JHB720 HIGH SPEED - BALLNOSE - TITANIUM - 3 FLUTES
JSB512 - GENERAL PURPOSE - BALLNOSE - UNIVERSAL - 2 FLUTES
JC845 - Compression - Composite - 3-5 Flutes
Video: JC898/899 Solid Carbide End Mills – Perfect in-tolerance finish machining
Video: HPM JHP993
Video: Solid carbide end mill Jabro-HPM JHP770
Video: Seco Solid² JS412 and JS509, designed for aluminum alloys
Video: Solid² JS554 3C
Seco increases flute options for popular High-feed end mill
SECO MINI END MILL SERIES ADDS BIG PRECISION TO TINY TOOLS
JHP951/993 High Performance - Square - Steel - 3-6 Flutes
JS553/JS554 High Performance - Square - Universal - 3-4 Flutes
Composite Machining Solid Carbide End Mills
JS754/755 Advanced Roughing – Square – ISO M and S - 4-5 flutes
JS754/755_C Advanced Roughing – Square – Titanium/Stainless – 4-5 Flutes
JMB542/562/564 - Miniature - Ballnose - Universal - 2-4 Flutes
JME642 - Miniature - Square - Graphite - Diamond coated 2 Flutes
JMB642 - Miniature - Ballnose - Graphite - Diamond coated 2 Flutes
JME542/562/564 - Miniature - Square - Universal - 2-4 Flutes
Video: Long-lasting Seco-Solid² JS750 end mills
JHF181 High Feed - Hardened Steel - 2-4 Flutes
TDM - General Purpose - Ball - Universal - 2 Flutes
JHP750 - High Performance - Square - Stainless Steels Titanium and Superalloy - 2-3-4 Flutes
JH820 - High Speed - Square - Graphite and High Content Si Aluminium - 2 Flutes
JH830 - High Speed - Square - Graphite and High Content Si Aluminium - 3 Flutes
JM403/404/406 - Minature - Square - 2 Flutes
JM413 - Minature - Ball - 2 Flutes
JM413 / 414 / 416 - Minature - Ball - 2 Flutes
High Performance Machining Solid Carbide End Mills
JS522 High Performance - Square - Universal - 2 Flutes, High Shoulder
JC870/871 - Square - Composite - Router
MZ645 - High Speed - Ballnose - Hardened Steel - 6 Flutes
MB215 - High Speed - Square - Hardened Steel - 2 Flutes
JH970 High Speed - Ballnose - Universal - 2 Flutes
JH930 High Speed - Square - Universal - 5-8 Flutes
JH910 High Speed - Square - Universal - 3 Flutes
JH450/460 High Speed - Ballnose - Aluminum - 2 Flutes
JH440 High Speed - Square - Aluminum - 2 Flutes
JH150/JH160 High Speed - Ballnose - Hardened Steel - 4 Flutes
JH142 High Speed - High Precision Torical - Hardened Steel - 2-6 Flutes
JH130 High Speed - Square - Hardened Steel - 5-8 Flutes
JH120 High Speed - Square - Hardened Steel - 4 Flutes
JH112 High Speed - High Precision - Ballnose - Hardened Steel - 2 Flutes
SN200R - High Feed - Universal - 2-5 Flutes
MZN410R - High Feed - Hardened Steel - 4-5 Flutes
JHF980 High Feed - Universal - 2-5 Flutes
JHF181 High Feed - Hardened Steel - 3-5 Flutes
STR540 - High Performance - Square - Universal - 5 Flutes