DOUBLE TURBO - 4 CUTTING-EDGE DOUBLE-SIDED INSERTSUsing the most positive helix cutting angle geometry on the market today means less power consumption, smoother cutting and longer tool life. Together with the impressive 90-degree angle accuracy and the double-sided inserts, this generates a good surface finish and optimizes costs.
LESS POWER CONSUMPTION, SMOOTHER CUTTING AND LONGER TOOL LIFE
Using the most positive helix cutting angle geometry on the market today means less power consumption, smoother cutting and longer tool life. Together with the impressive 90-degree angle accuracy and the double-sided inserts, this generates a good surface finish and optimizes costs.
SIGNIFICANTLY SHORTEN YOUR FINISHING TIMES
The longer your finishing operations take, the more time you spend machining a workpiece and the higher your cost per part. Now you can significantly shorten, or in some instances, completely eliminate your finishing time when you machine with the new Double Turbo inserts.
BE IMPRESSED WITH YOUR SMOOTH WALL SURAFCES
Finishing operations add the most time to overall part machining cycle times. The extremely impressive 90-degree angle accuracy of the Seco Double Turbo inserts give a good surface finish with less mismatch and allow you to shorten machining times.
LESS VIBRATIONS, LESS BREAKAGES
With a high positive geometry, the Seco Double Turbo insert provides efficient chip evacuation and significantly reduces the generation of workpiece burrs, especially in steel, stainless steel and titanium part applications.
The insert cuts with less force and so vibrations are minimized leading to extended tool life and smoother surface finish.
Plus, the double-sided design gives significant cost-per-edge savings.
THE CUTTER BODY HAS BENEFITS TOO
You’ll enjoy extended tool life, reduced vibrations and improved process reliability, thanks to the insert mounting security of three contact areas in its pockets, along with a center screw. The cutter body has a diamond patterned surface which generates less heat due to reduced contact between chips and body, and the fact that it is stainless steel and nickel-free means it is environmentally friendly too.
- Metric range ø40 mm – 200 mm (18 variations)
- Inch range ø1.50" – 5.0" (13 variations)
- Shanks with weldon and cylindrical mounting
- Arbor and combimaster heads
- 16 mm (0.63") length, 7 mm (0.275") thickness
- Two available geometries
- Two radii sizes
- PVD & CVD Duratomic® grades