Above-sea equipment components
The Oil & Gas industry has a leading role in assuring the worlds energy supply. Critical for both political and economical stability throughout our planet, the industry represents the pinnacle of reliablitity with innovative exploration and extraction solutions.
With expected manufacturing increases of Oil & Gas related equipment for many years to come, Seco® can help with premium tooling solutions to assist in the production of drilling equipment, sub- and above-sea components and many other vital equipment.
We listen to our customers, understand and address their needs.
Our experienced people provide daily on-site support, test the very latest
tool and grade developments and optimise solutions with our clients.
Machining competence, discussed, tested and applied.
Above-sea equipment component application examples:
 |
|
|
|
L-Block
Material: 4130
Operation: Rough milling, high feed milling
Criterion: Metal removal, tool life
Tool: R220.21-0080-R160.6, insert T350M
Cutting data: vc = 200m/min, fz = 1.1mm/t, ap = 1.2mm, ae = 75%
|
|
|
 |
 |
|
Y-Block
Material: 4130
Operation: Rough milling, high feed milling
Criterion: Metal removal, tool life
Tool: R220.21-0080-R160.6, insert T350M
Cutting data: vc = 200m/min, fz =1.1 mm/t, ap = 1.2mm, ae = 75%
|
|
|
|
|
|
|
Buffle plate (heat exchanger)
Material: SUS304
Operation: Drilling
Criterion: metal removal, tool life
Tool: SD502-43-86-40R7, SP/CX12 T400D/T300D
Cutting data: vc = 160 m/min, f = 0.13 mm/rev, vf = 154 mm/min
|
|
|
|
|
|
|
Filter plate
Material: 410S
Operation: Drilling
Criterion: Metal removal, tool life
Result: 4000 holes/drill
Tool: SD203A-12.0-36-12RS
Cutting data: vc = 80 m/min, vf = 424 mm/min, ap = 16 mm
|
|
|
|
 |
|
Tubing flange
Material: 4140
Operation: Drilling
Criterion: Metal removal, tool life
Result: Tool life increased by 25%
Tool: SD505-33.5-168-40R7
Cutting data: vc = 130 m/min, vf = 140mm/min
|
|
|
|
|
|
|
Roll
Material: Z300 (65 HRc)
Operation: OD turning
Criterion: Metal removal, tool life
Tool: RNMN120400S, CBN350
Cutting data: vc = 70 m/min, f = 0.25 mm/rev
ap = 1 mm
|
|
|
|
|