Language: English Click to choose Language

Language:

Seco News 2014-2

The new Seco News with our newest innovative products have arrived. Enhance your competitiveness and your productivity.

 

 

SQUARE T4-08
STABILITY AND VALUE IN SQUARE SHOULDER MILLING

Made for roughing and semi-finishing operations, the Square T4-08 brings smooth cutting action, good surface finish and minimal chatter to slotting and contouring applications. The tangential mounting of the tool’s inserts increases the surface area of contact between the inserts and cutter body, resulting in increased rigidity and machining stability.

Read more

 

MINIMASTER® PLUS
FLEXIBLE AND COST-EFFECTIVE MODERN ENDMILL DESIGN

Seco developed the Minimaster Plus with speed, precision and complete versatility in mind. To make the system even more adaptable, the company has added internal coolant capability to all three of its diameter sizes of the new high-feed milling heads.

Read more

 

335.19 DISC MILLING CUTTER
STRONG PERFORMANCE IN DISC MILLING

Designed for all disc milling applications, including slotting, sawing, circular interpolation and back facing, the revamped 335.19 inch range features a hardened steel 44 HRc cutter body for high precision, long body life and resistance against deflection.

Read more

 

STEADYLINE™ COMBIMASTER
HOLDERS
SECOMAX™ CW100
SPEED AND STRENGTH IN HRSA GROOVING

Made for grooving operations in nickel-based HRSA, the CW100 is an aluminium oxide-based insert grade with silicon carbide whiskers (Al2O3-SiCw). When dispersed into a matrix of fine-grained aluminium oxide, these extremely strong whiskers act as reinforcement, adding tensile strength and improving the fracture toughness of the brittle matrix.

Read more

 

MDT
OPTIMISATION OF GROOVING APPLICATIONS

Designed to accommodate narrow cutting edge widths in grooving and parting-off operations, Seco’s MDT (Multi-Directional Turning) system has traditionally consisted of 1 and 2 sided inserts, as well as mono and modular tool holders for radial internal, external and axial machining. This range is continuously growing.

Read more

 

X4
MAXIMUM STABILITY IN SMALL PARTS MACHINING

Seco designed the X4 system for the precise grooving and parting-off of small and medium-sized complex parts. The company is increasing the amount of applications that the system can accommodate by adding smaller shanks to the product family.

Read more

 

THREAD CHASER

COMPLETE THREAD MACHINING IN A SINGLE PASS

Highly versatile, the new Thread Chaser tool features inserts for both push and pull threading of I.D. features. As opposed to single-tooth inserts, Thread Chaser inserts include multi-tooth patterns for fast 1 or 2 pass threading.

Read more

 

THREADMASTER™ TM2
SOMPLICITY AND RELIABILITY IIN THREAD MILLING

The Threadmaster TM2 general-purpose thread mill covers an expansive range of applications. It productively generates high-tolerance, full thread profiles and allows those less experienced with thread milling operations to confidently generate perfect threaded holes as part of complete workpiece processing..

Read more

 

THREADMASTER™ TAP
FLEXIBLE VALUE IN TAP TREADING

Designed to be universal in application, the new high-speed steel Threadmaster Tap effectively threads holes in a wide range of workpiece types and materials.

Read more

 

SECO FEEDMAX™ UNIVERSAL
OPTIMUM PERFORMANCE AND VALUE IN DRILLING

Seco Feedmax Universal offers performance and value for holemaking applications across all industry segments. The line features a multipurpose, 4 facet point geometry that provides excellent centering capability, maintains an IT8 / 9 hole tolerance and is easy to regrind.

Read more

 

PRECIMASTER PLUS

ACCURACY AND ADAPTABILITY IN REAMING

Precimaster Plus now uses solid-carbide disposable heads up to diameter 32 mm, coated and uncoated, in various diameters that mount to a standard range of shanks. As opposed to traditional brazed-tip technology, solid-carbide heads allow for an increased number of cutting teeth on the same head diameters for faster feed rate capability..

Read more

 

EPB® 5867

HIGH-PERFORMANCE OUTPUT IN TAPPING

The EPB 5867 tapping chuck features newly developed micro-compensating capability for synchronised tapping. The highly effective compensating system prevents tap breakage and ensures perfect high-quality threads, especially in blind hole tapping applications.

Read more

 

STEADYLINE™ TURNING AND BORING BARS WITH GL CONNECTION
DAMPING AND FLEXIBILITY IN STATIC AND ROTATING BORING

Following the launch of its Steadyline milling holders, such as the shell mill and Combimaster™, Seco now offers turning and boring bars within the series to bring excellent results to a wide variety of operations, including roughing and finishing in both static and rotational boring applications as well as static threading and grooving. The product range includes bars for 6 x D, 8 x D and 10 x D.

Read more

 

STEADYLINE™ SHRINKFIT EPB K603 / K600
VIBRATION-DAMPING WITH LONG OVERHANGS

Steadyline Shrinkfit chucks feature a world-class patented design that combines the benefits of vibration / chatter damping technology with those of heat-Shrinkfit tooling system. Non-material dependent, Steadyline Shrinkfit holders address the needs of the mouldmaking, aerospace, power generation and any other industries where machining requires extremely long tool overhangs, such as in the production of deep housings or blisks.

Read more

 

JABRO®-SOLID2
VERSATILITY IN ALL MATERIALS

Seco’s new generation of Jabro-Solid2 solid endmills represents over 800 universal products that apply to all commonly machined materials, from steel to titanium alloys. These highly versatile products offer an estimated 30% increase in tool life and 20% higher speeds and are designed to be applied in a wider range of applications compared to the previous generation. These productivity gains stem from optimised geometries and special edge preparations along with a new NXT coating technology.

Read more

 

JABRO®-HPM JHP951
HIGHLY PRODUCTIVE ROUGHING

Previously available with 3, 4 or 5 flutes, the Jabro-HPM JHP951 highperformance solid endmill for roughing applications now comes in a 4 flute design to achieve high-performance metal removal rates in unstable machining conditions.

Read more

 

JABRO®-MINI JM905 & JM920
PRECISION AND RELIABILITY IN IMPLANT MACHINING

A 4 flute option joins the Jabro-Mini JM905 and JM920 tools, which are part of the JM9 series of Mini solid endmills. This expansion reflects the increased demands for small tools within the medical and dental industries..

Read more

DOWNLOAD SUMMARY (PDF)

 English  Brazilian  Chinese  Czech  French  Hungarian  Indonesian  Italian  Japanese Korean  Dutch  Polish  Romanian  Russian  Slovenian  Swedish  Thai  Turkish Vietnamese

 CATALOGUE (PDF)

Milling  English 
Turning  English 
Holemaking  English 
Solid End Mills  English 
Threading  English